SHIFT-WIKI - Sjoerd Hooft's InFormation Technology
This WIKI is my personal documentation blog. Please enjoy it and feel free to reach out through blue sky if you have a question, remark, improvement or observation. See below for the latest additions, or use the search or tags to browse for content.
Cisco Radius Authentication on Active Directory 2008
Summary: This post describes the installation and configuration how to authenticate on Cisco devices with the use of Microsofts Active Directory.
Date: Around 2010
Refactor: 21 February 2025: Checked links and formatting.
The Active Directory will be running on a Windows Server 2008 SP2, standard edition (64 bits). The steps coming towards this configuration are these:
- Installation Network Policy Server (NPS)
- NPS is the Microsoft implementation of a Remote Authentication Dial-in User Service (RADIUS) server and proxy in Windows Server 2008
- Configuration of a 'Remote Access Policy'
- Configuration of a 'Radius Client'
- Configuring of Cisco Devices for authentication through radius
Cisco Port Speed
Summary: This is an example of an interface on a cisco switch with the port speed configured:
Date: Around 2010
Refactor: 21 February 2025: Checked links and formatting.
interface GigabitEthernet1/0/18 switchport access vlan 150 switchport mode access duplex full speed 100 spanning-tree portfast
This wiki has been made possible by:
Cisco ASA Firewall Authentication
Summary: Information all around on Cisco ASA Firewall Authentication.
Date: Around 2017
Refactor: 20 February 2025: Checked links and formatting.
This is a page with information about cisco authentication on an ASA firewall, and it is an addon to the Cisco Radius Authentication on Active Directory 2008 article.
All commands assume you've already logged on to the switch with privilege level 15 access and are already in config mode (conf t).
Cisco Authentication
Summary: Information all around on Cisco Authentication
Date: Around 2009
Refactor: 21 February 2025: Checked links and formatting.
This is a page with information about cisco authentication. It is an addon to the Cisco Radius Authentication on Active Directory 2008 article.
All commands assume you've already logged on to the switch with privilege level 15 access and are already in config mode (conf t).